LOCTITE All Plastics - CA Liquid Specialties
Ensure all surfaces to be bonded are clean and dry and close fitting. Avoid skin contact with the glue or activator. First apply one or two coatings of the activator to both surfaces. Ensure coverage is sufficient to treat the entire bonding area. Re-cap the activator pen tightly immediately after use. The activator must be allowed to dry and react with the surface for 1 to 2 minutes. Apply minimum quantity of LOCTITE SUPERGLUE All Plastics to one of the surfaces to be bonded. Bring parts together immediately and hold by hand pressure for at least 1 minute.
Leave undisturbed for 10 minutes or preferably overnight to allow full bond strength to develop. Avoid spillages and protect work surfaces. Remove cured residues of LOCTITE SUPERGLUE All Plastics with LOCTITE Glue Remover. For best results, the bonds should be prepared at room temperature (15-30°C) and a minimum 30% relative humidity.
For optimum product life, wipe the nozzle with a tissue to remove excess adhesive, replace cap and store the pack in a cool, dry place.